PU Resin Comfort Floors

PU Resin Comfort Flooring is a selection of self-smoothing floor systems developed to be comfortable underfoot, seamless and free of joints and grout lines.

By their nature, Polyurethane Resin Comfort Floors are elastic and flexible floor finishes designed to be soft and comfortable underfoot, extremely easy to clean and hypoallergenic due to their completely smooth and continuous finish.

Resin and seamless floors are becoming a popular choice in the domestic markets in addition to commercial and retail spaces due to their open plan and stylish appearance, which are available in an extensive range of RAL and NCS colours.

Resin comfort floors also offer unique noise-reducing properties, which can be increased up to >21Db using our acoustic crumb base and are compatible with various underfloor heating systems.

PU Comfort Floor Product Options

Our comfort floor systems are available in the following variants;

Mono PU Comfort Floor
Single colour, UV stable, smooth finish.
Nominal thickness: 4-5mm
Colours: RAL or NCS Colours
Suitable for application over screeds and good quality substrates.
Available in any standard RAL or NCS colour.

Mono Acoustic PU Comfort Floor
Single colour, UV stable, smooth finish with an acoustic supportive base.
Nominal thickness: 7-8mm
Colours: RAL or NCS Colours
Suitable for application over screeds with UFH, substrates that may exhibit minor cracks, or timber joisted substrates / raised floors.
Available in any standard RAL or NCS colour

Benton Look (Dual Colour) PU Comfort Floor
A blended duo colour, UV stable, smooth finish.
Nominal thickness: 4-5mm
Colours: 40 colour blend choices
Suitable for application over screeds and good quality substrates.
Available in a selection of 40 colour blends

Benton Look (Dual Colour) PU Acoustic Comfort Floor
A blended duo colour, UV stable, smooth finish with an acoustic supportive base.
Nominal thickness: 7-8mm
Colours: 40 colour blend choices
Suitable for application over screeds with UFH, substrates that may exhibit minor cracks, or timber joisted substrates / raised floors.
Available in any standard RAL or NCS colour

Subfloor Quality and Preparation

As with any resin flooring system, it is essential to ensure that the substrate is of good quality and without any defects to BS EN 8204-1.
Any underfloor heating is fully commissioned in advance of the installation following the BS EN 1264 Part 4 and BS 8204 Part 1 guidelines where applicable.
A typical application of the above systems would be between 4-6 days, depending on project size, complexity and colour, resulting in a beautiful and seamless floor finish.
For more information and our subfloor specification guidance, don’t hesitate to get in touch with us.

PU Comfort Floor Technical Data

Application Thickness 4-5mm (7-8mm Acoustic option)
Layers of Application 5
Shore Hardness D60 (Mono Colour)
D40 (Benton Dual Colour)
Slip Rating 75 (Dry test) – Equivalent to R13
20 (Wet test) – Equivalent to R9
PTV Rating
Typical Installation Time 5-6 days
Colour Options Standard RAL or NCS colours (mono)
40 colours (Benton Dual Colour)
UV Stable Yes
VOC Emission Free Yes
Acoustic Value / Reduction >8Db (Standard version)
>21Db (Acoustic version)
Substrates Screeds, Concrete (Standard version)
Screeds, Concrete, Timber Joist, Raised Floors (Acoustic option)
BS EN 8204-1
Suitable with UFH Yes BS EN 1264 Part 4 and BS 8204 Part 1
Type of Use Domestic, Retail & Light Commercial Internal use only

Further technical data can be found by following this link.

Other seamless flooring products.

Poured resin

A seamless floor finish with a mottled cement like texture. Suitable for both domestic and commercial environments and available in ten warm colours.

Read more

MicroCrete®

Our Micro Concrete systems are cement-based coatings with added polymers, which are perfect companions for floors and walls. Although application thickness on average between only 2-3mm, the finish is hard wearing and offers a beautiful and bespoke style.

Read more

Pandomo Floor & Floor Plus

panDOMO® Floor and FloorPlus are cement-based floor coverings which allow an almost unlimited range of designs and colours thanks to their unique design concept. With panDOMO® floor range, seamless and joint-free floors can be achieved giving a spacious feel.

Read more

Pandomo Loft

A decorative and eco-friendly protective film, perfect for redesigning existing ceramic floors. Suitable for both domestic and commercial environments and available in ten warm colours.

Read more

Pandomo Studio (NEW)

panDOMO® Studio is a strong floor covering material is a trowel applied finish which offers subtle variation in tone and texture whilst offering one of the hardest surfaces within the Pandomo microcement range.

Read more