2x 100m2 Cementoresina in WR02
35m2 Microresina applied over existing parquet in WR02
2x 100m2 Floors – Cementoresina
Preparation was to remove existing floor coverings by mechanical tooling.
Infills had to be made by use of epoxy screed where required.
Floors were epoxy primed and 10mm of levelling screed was applied to bring floor heights up to within 3.5mm of finished floor heights.
Cementoresina in WR02 applied to areas.
Exisitng parquet sanded and Microresina applied on two coats to floor which was then finished with the final clear sealant.